Easily over £350 for all these items if you were to go buy them from new. Let’s go through the list.

1 x coffee gear basic coffee scale. up to 2000g
2 x Clever dripper brew pot (1 in box, 1 without box), clear plastic.
300 x large Kalita filters
1 x espresso group head cleaner (the red plastic piece in the bag)
2 x espresso spoons
2 x tampers (1 solid metal, 1 plastic handle with metal base)
2 x espresso grind distributors (1 in box, 1 out of box)
1 x Cafiza 2 espresso machine cleaner
5 x coffee bean trays (for sampling)
2 x Kalita 500ml glass jug
2 x Kalita glass filter holder
100 x Hario V60 filters
2 x Hario V60 dripper (1 in box, 1 out of box)
1 x Hario V60 glass jug 360ml
1 x Hario V60 glass jug 600ml
1 x pack of 10 chemex filters
1 x express knock box
1 x chocolate powder dispenser for cappuccino
2 x french press dispensers
1 x hand coffee bean grinder (metal)
1 x rhino wares small milk jug frother
1 x large milk jug frother
2 x Goose neck kittle for pour over coffee (1 in box, 1 out of box)

BWT besttaste Water Softener Filter Cartridge 10 (X) – 10,000L

BWT besttaste filter cartridges provide the best quality water for vending machines, coffee machines and water dispensers. Particles entering the water during installation, and unwanted tastes and smells, are eliminated, producing the maximum flavour in all hot and cold drinks. With BWT besttaste, water from water dispensers is of a consistently high quality. Even coffee and vending machines in areas of low carbonate hardness will benefit from the improved water quality.

Benefits of BWT besttaste at a glance:

Instant, top-quality, particle-free water
Reliable elimination of ‘off-flavour’ elements
Large filtration capacity of 10,000 litres
Reduction in heavy metal content
Activated carbon with antibacterial properties
More:

Filtration system to remove ‘off-flavour‘ elements and chlorine from mains water
Highly effective activated carbon filter
Guaranteed removal of particles and particulate matter
High sensory quality of the filtered water
BWT besttaste X
Connection thread (in/out) 3/8″
Nominal flow (l/h) 180
Pressure loss at the nominal flow rate [bar] 0.8
Typical capacity [litres) 10.000**
Particle filtration [µm] 5
Useful pressure range, min.– max. [kPa]/[bar] 200 – 800/2 – 8
Flow pressure [bar] > 1.2
Water temperature min – max in °C 4 – 30
Ambient temperature during operation, min.– max. [°C] 4 – 40
Ambient temperature during storage/transportation [°C] -20 – 50
Total height without bracket (A) in mm 280
Total height with bracket (B) in mm 300
Connection height (C) in mm 230
Distance from floor (D) in mm 65
Installed length (E) in mm 125
Filter cartridges Ø (F) in mm 88
Weight (dry/wet) in kg, approx. 0.50/1.10
Operating position horizontal or vertical

The BWT Aquameter records the amount of litres that passes through it. A visual aid to tell you when your current water filter needs replacing. A must for any water softener installation, don’t rely on a timescale, an aqua meter is for more accurate filter changes. A programmable Aquameter ensures that you get the maximum capacity out of your water filter and helps you change it when its due. After completing a water test you will know the capacity of your cartridge in litres, program this in the compact and remote digital display and it will count down as you use water. The BWT 3/8″ Aquameter with LCD Display is compatible for use with all varieties of BWT water filter cartridges including the BestMax Premium and BestTaste.

Celebrating Acaia’s 5th year anniversary, the Acaia Cinco Anniversary Edition is a collector’s item that combines Acaia’s design aesthetic and smart technology in one mini silver enclosure. It may look very similar to the Lunar, but Cinco is unique in its own way. With surprisingly high precision, it can weigh down to as little as 0.01 g but up to 500 g. This is perfect for weighing smaller amounts during single-shot espressos, tea leaves, coffee mixology, DIY water, or take it with you wherever you go.

The Cinco has three modes available:

1. Weighing mode: only weight is shown
2. Weighing + timer mode: 0:00 and 0.00 g are shown
3. Auto-tare timer mode: 00 time (seconds only) and 0.00 g are shown. When you place an item on the scale, it will tare automatically. The timer begins when the scale senses a continual change in weight, like an espresso shot.

Each Cinco package includes:
– Acaia Cinco Scale
– aluminum carrying case
– 100 g calibration weight
– micro-USB cable
– 3-pin set

Specifications:

– Dimensions 65mm(W) x 65mm(L) x 13mm(H)/
2.55in(W) x 2.55in(L) x 0.51in(H)
– Weight: 70g/0.15lb
– Capacity: 500g/1.1lbs Max: 500g Min: 0.01g
– Measuring Units: oz,g
– Permissible Error Range: +/-0.01g
– Increments: 0.01g
– Display: LED
– Battery: Lithium ion, USB Rechargeable
– Connectivity: Bluetooth 4.0
– Material: Anodized aluminum, Acrylic (display)

If you wish to have the best and most reliable performance out of your Mahlkonig EK43, then it behooves you to consider burr alignment as part of your regular maintenance. While the grind uniformity of the EK43 is impressive out of the box, over time the burrs may shift or become misaligned during regular maintenance and cleaning, and re-aligning them afterward can be tricky without the right tools. That’s where Titus Grinding’s EK43 alignment tool will make your life easier. Using a custom mounting bracket and a standard dial indicator, this alignment tool will allow you to check that your stationary burr is properly perpendicular to the drive shaft along its entire circumference. The kit includes everything you need to check and correct alignment – including strips of steel shim material, labeled by thickness.

You can use our video above as a basic guide for how to mount and use the tool to check alignment. If you encounter low spots while checking the dial indicator, take note of the measurement on the indicator and use a piece of the corresponding thickness of shim material to shim the burr. You may wish to mark the burr with a marker to keep track of where the low spot was, and use a small drop of superglue (cyanoacrylate) to adhere the shim to the underside of the burr. Cyanoacrylate glues can be released with heat, so the shim can be removed later if needed. After shimming the burr, repeat the process until the dial indicator shows a steady and consistent deflection all around the burr. Please note that this tool is designed to be used with the EK43 S, but can be used with the EK43 when the 0.2mm (or larger) shim is placed at the motor shaft with the aluminum block of the adjustment tool.

What’s in the Box

Dial indicator with hardshell case
Mounting bracket for EK43 with mounting screws
Steel shim material: 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.12, 0.15, 0.18, 0.2, 0.25 (mm)

Features
Custom made for EK43 grinders
Check burr alignment and burr deflection and shim low spots
Designed to check stationary burr
Bracket mounts to drive shaft
Dial indicator with 0.01 mm scale